|
| | |
|
OEM Siemens POWER ELECTRONICS DVIVCES
|
Product
code |
Input
voltage |
Rated
power
kVA/kW |
Output |
Output
protection |
|
CONV A60 |
400V 3Ph, 50Hz |
60kVA/54kW |
440V 3Ph+N, 60Hz |
Switch isolator |
|
CONV A20 |
380V 3Ph, 50Hz |
20kVA/18kW |
115V 3Ph, 400Hz |
Switch isolator |
|
Product
code |
Input
voltage |
Rated
power |
Output |
Output
protection |
|
INV 160-330 20 60Hz |
160Vdc �?330Vdc (max 450Vdc 50msec) |
20kVA/16kW |
115V 1Ph+N, 60Hz |
Contactor |
|
INV 160-330 20 400Hz |
160Vdc �?330Vdc (max 450Vdc 50msec) |
20kVA/16kW |
115V 3Ph+N, 400Hz |
Contactor | STATIC FREQUENCY CONVERTERS 400 Hz
FEATURES:
�?High efficiency > 93%;
�?Filtered, stabilized and regulated sine wave
supply;
�?400Hz ± 0.01% frequency accuracy;
�?Input power factor > 0.95;
�?Wide input voltage and frequency range
�?Insulation transformer;
�?LCD display;
�?Emergency Power Off;
�?Power up to 315 kVA
STANDARDS:
�?ISO 6858
�?MIL‐STD�?04
�?EN 2282
FIELDS OF APPLICATION
�?AVIATION
�?MARINE
�?MILITARY
�?INDUSTRY
�?OIL & GAS
FEATURES
�?High efficiency > 93%;
�?Filtered, stabilized and regulated sine wave supply;
�?Input power factor > 0.95;
�?Wide input voltage and frequency range
�?Insulation transformer;
�?LCD display;
�?Emergency Power Off;
�?Power up to 800 kVA
STATIC FREQUENCY CONVERTERS 50Hz-60Hz
STANDARDS:
�?ISO 6858
�?MIL‐STD�?04
�?EN 2282
LUMINOUS FLUX REGULATORS
FIELDS OF APPLICATION
�?AIRPORT ILLUMINATION
�?INDUTRIAL PLANTS
�?PUBLIC LIGHTING
�?BORDER SECURITY
FEATURES:
�?Input power factor at full load > 0.95;
�?Efficiency > 90%;
�?Energy saving with reduction of luminous flux;
�?Reduced cable cross section of plant system (9.6A or 20A):
up to 100kVA;
�?Absence of any stress on electrodes lamp during ignition;
�?Certificated Insulation controller;
�?1% output current stabilization.
STANDARDS:
�?EN 60662
�?CEI 64�?
�?EN 60071�?/2 (CEI 28�?)
�?EN 50081�?
�?EN 50082�?
FREQUENCY CONVERTERS FOR VESSELS
POSSIBLE CONFIGURATIONS:
�?on the dock �?DOCK SERIES. Predefined
Input Voltage (dock) to selectable Output
Frequency/Voltage (vessel).
�?onboard �?NAVY SERIES. Selectable Input
Frequency/Voltage (dock) to Predefined
Output Voltage (vessel).
STANDARDS:
�?EN 62040
�?EN 60950
�?EN 61000
FREQUENCY CONVERTERS FOR VESSELS
FEATURES:
�?High efficiency > 93%
�?Filtered, stabilized and regulated sine
wave supply;
�?High input power factor;
�?Automatic working;
�?LCD display;
�?Insulation transformer;
�?Remote control as option;
�?Drop line compensation as option;
�?Battery version (UPS) as option;
�?IP55 as option;
�?Mobile or horizontal version as
option;
�?Low audible noise;
�?Dry contact interface standard ,
RS232, USB, RS485 and SNMP as
option;
�?Emergency Power Off.
MAIN APPLICATIONS:
�?AUTOMATION
�?INDUTRIAL PLANTS
�?OIL & GAS
�?RAILWAYS AND TRAINS
�?TELECOMMUNICATIONS
�?CIVIL AND MILITARY AVIATION
�?NAVY
�?PHOTOVOLTAIC PLANTS (OFF GRID)
�?COMMERCIAL AND LEISURE VESSELS
INVERTERS 110 Vdc �?220 Vdc input
INVERTERS 110 Vdc �?220 Vdc input
FEATURES:
�?Input filter
�?IGBT conversion unit (Inverter)
�?Output filter
�?Output insulation transformer
�?Static switch as option
�?Manual by‐pass as option
�?Insulation transformer for emergency line (as
option)
�?Parallel kit feature (as option)
STANDARDS:
�?EN 62040
�?EN 60950
�?EN 61000
Inverter transforms the continuous voltage into an alternating sinusoidal
stabilized voltage. The PWM modulation technique used reduces the harmonic
content of the output and limits voltage deviations under step load conditions.
MAIN APPLICATIONS:
�?UTILITY & COMMUNICATION
�?POWER GENERATION
�?SUBSTATIONS
�?MICROWAVE RELAY SITES
�?SWITCHGEARS
�?MANUFACTURING
�?EMERGENCY DC POWER
�?DC BRAKERS
�?COMMERCIAL
�?ALARM SYSTEMS
�?DC CONTROL SYSTEMS
�?TRANSPORTATION (Marine �?Aviation)
�?SIGNAL SYSTEMS
�?ALARM SYSTEMS
�?BATTERY CHARGERS
RECTIFIER / Battery Chargers
RECTIFIER / Battery Chargers
FEATURES:
• Clean and stable output DC current with ripple voltage
peak‐peak value <1%
• Redundant fan system with temperature and air flow
control.
• Automatic charging modes.
• Manual charging mode.
• Adjustable voltage levels (the rectifier can operate as a
power supply at the rated voltage or as a battery
charger).
• Adjustable times and alarm thresholds.
• Temperature compensation
• Digital microprocessor control (DSP + PLD).
• Full optical isolation on all the logic and interface cards.
• Low input harmonic distortion with the 12/18/24�?BR>phase bridge and the optional input filter.
• Certified to withstand the harshest environment
conditions.
• Efficiency exceeding 90% (low‐frequency transformer
included).
• Modbus communication interface through RS232 or
RS485 port.
• Ethernet connectivity.
• Battery monitoring system.
• “H class�?input isolation transformer.
UPS �?UNINTERRUPTIBLE POWER SUPPLY
Single Phase
Single phase UPS of many size to cover multiple purposes. Typical applications
range from distributed PLC based controls to complete Distributed Control
Systems (DCS) with power requirements ranging from 3 to 50 KVA�?50/60Hz.
UPS �?UNINTERRUPTIBLE POWER SUPPLY
Three Phase
Three phase power back‐up and
power quality solutions for mission
critical applications in refineries,
petrochemicals, power generation,
steel & metals, process industries,
healthcare, telecommunications as
well as airport power applications. UPS
range from 20kVA to 800KVA.
|
|
|
|
